Hydrocolloid Dressing Foam Backed

Hydrocolloid Dressing Foam Backed

Details
Our sterile hydrocolloid dressing foam backed absorbs exudate, provides cushioned barrier protection, and maintains an optimal moist healing environment for clinical wound care.
Category
Hydrocolloid Wound Dressing
 
Send Inquiry
Description
Technical Parameters
4

Product Overview

 

The hydrocolloid dressing foam backed is an engineered composite wound interface comprising a synthetic hot-melt adhesive compound integrated with pharmaceutical-grade sodium carboxymethyl cellulose (CMC), laminated to an external low-density foam backing and a high-moisture-vapor polyurethane barrier. Unlike plain foam covers, this hybrid configuration utilizes an active hydrocolloid core that hydrates upon contact with wound discharge, transitioning into an intact cohesive gel that protects exposed sensory nerve terminals while sustaining physiological moisture levels. The overlying foam substrate provides resilient kinetic attenuation against external pressure, optimizing dressing performance across non-infected shallow dermal lesions and surgical sites requiring dependable fixation.

 

 

 

Products Description

 

Item Specification
Product Name Hydrocolloid Dressing Foam Backed
Dressing Type Hydrocolloid Wound Dressing with Foam Backing
Base Material / Active Ingredient Sodium carboxymethyl cellulose (CMC), hot melt synthetic adhesive matrix, polyurethane (PU) foam/film backing composite, and single silicon white kraft release liner
Sterility Sterile
Available Sizes 5 cm × 5 cm, 10 cm × 10 cm, 15 cm × 15 cm, 15 cm × 18 cm (Custom sizes available upon request)
Material Structure Multi-layer composite: semi-permeable PU protective film, cushioning foam backing layer, adhesive CMC hydrocolloid contact layer, and silicone-coated release paper
Packaging Individual sterile peel pouch; multi-pack inner box; export shipping carton
Sterilization Method Radiation / EO Sterilization (To be confirmed per lot specification)
Shelf Life 5 Years
Storage Condition Store between 0°C and 40°C, relative humidity ≤ 80%, well-ventilated, non-corrosive environment
OEM / ODM Support Yes (Custom dimensions, customized packaging, private label branding, and barcode integration supported)

 

 

 

Key Features

 

  • Anatomical foam cushioning structure – attenuates direct shear stress and kinetic impact across bony surfaces, which helps prevent secondary mechanical trauma to sensitive tissue beds.
  • Gel-forming CMC suspension – hydrates gradually during fluid uptake to establish a cohesive amorphous gel layer, which helps maintain physiological tissue hydration without macerating surrounding skin margins.
  • Engineered fluid uptake mechanism (Liquid permeability: ≥ 1.0 g/10 cm²/24h and ≥ 2.0 g/10 cm²/48h) – facilitates balanced exudate management, which helps reduce routine changing intervals during low-to-moderate drainage phases.
  • Calibrated interfacial adhesion (Peeling resistance ≥ 1.0 N/cm) – provides continuous perimeter bonding, which helps stabilize dressing margins against accidental roll-off during bodily movement.
  • High-stability shear retention (Holding displacement ≤ 2.5 mm) – limits dressing slippage under tangential stress, which helps preserve uninterrupted wound isolation.
  • Continuous wear adaptability (1 to 7 days retention capability) – facilitates extended in-situ application based on exudate velocity, which supports undisturbed tissue proliferation.
  • Opalescent saturation demarcation – develops visible central gel whitening upon fluid saturation, which helps clinical teams verify replacement timing before lateral leakage occurs.
  • Low-trauma 180-degree peel geometry – allows tangential removal that eases dressing release, helping reduce micro-tears along delicate periwound margins.

 

5
7

Indications & Applications

 

Clinical Wound Coverage Classifications:

  • Post-Operative & Clean Surgical Closures: Recommended for sutured or stapled surgical cuts, clean incision lines, and dermatological excision sites requiring particulate isolation and controlled exudate processing.
  • Friction-Exposed Pressure Zones: Useful as protective coverage over non-broken, vulnerable epidermis or superficial intact Stage I and Stage II pressure areas prone to surface shear.
  • Superficial Thermal & Friction Trauma: Applicable to minor partial-thickness burns, superficial scalds, skin tears, donor harvest zones, and epidermal abrasions displaying low-to-moderate fluid loss.
  • Superficial Ulcer Management: Serves as a primary wound cover for non-infected venous leg ulcers, small arterial lesions, and medically monitored diabetic ulcers under close periodic observation.

 

Contraindications & Operational Limits:

  • Strictly contraindicated on clinically infected wounds, third-degree deep thermal injuries, or high-output cavity lesions exceeding hydrocolloid absorption capacity.
  • Do not apply to patients with confirmed cutaneous hypersensitivity to sodium carboxymethyl cellulose or synthetic hot-melt adhesive formulations.
  • Single applications should not exceed 7 consecutive days; cumulative continuous usage should remain within 30 days.

 

For professional use only.

Sizes & Packaging

 

Produce code Dressing Size(cm) Quantity(Dressings/Box)
THD0505 5×5(extra thin) 10
THD1010 10×10(extra thin) 10
THD1515 15×15(extra thin) 10
BHD0505 5×5(with border) 10
BHD1010 10×10(with border) 10
BHD1515 15×15(with border) 10
FHD0505 5×5(with foam) 10
FHD1010 10×10(with foam) 10
FHD1515 15×15(with foam) 10

 

Wholesale OEM / Contract Manufacturing Provisions:

  • Substrate & Packaging Customization: Optional paper/poly heat-sealed pouches or high-barrier aluminum envelopes featuring customized typography, batch coding, and regulatory markings.
  • Distribution-Ready Secondary Packs: Private-label outer corrugated shippers, customized inner carton counts, localized IFU leaflets (Instructions for Use), and GS1/UDI barcode printing tailored to domestic or regional compliance standards.

 

 

10

 

Quality & Regulatory Information

 

  • Quality Systems: Fabricated under documented quality management workflows conforming to ISO 13485 medical device production benchmarks.
  • Chemical Purity & Heavy Metals: Finished product heavy metal concentration verified at ≤ 10 mg/kg, ensuring compliance with established medical purity thresholds.
  • Physicochemical Compatibility: Maintains balanced topical skin compatibility with an extractable pH range between 4.0 and 7.0.
  • Sterile Processing Assurance: Validated terminal sterility; unit-packaged in tamper-evident tear pouches that guarantee barrier safety prior to seal rupture.
  • Regulatory Dossiers: CE Marking / US FDA status: To be confirmed per regional market distribution schedule.

 

 

 

 

 

Hot Tags: Hydrocolloid Dressing Foam Backed, China Hydrocolloid Dressing Foam Backed suppliers, manufacturers, factory

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!