Bordered Foam Dressing

Bordered Foam Dressing

Details
Medical-grade bordered foam dressing featuring a hydrophobic PU membrane with sub-micron pore size (≤0.5 µm) that physically excludes bacteria (0.5–5 µm) while repelling liquid ingress. Engineered for contamination-prone surgical and chronic wounds. CE 0197, ISO 13485, and FDA compliant.
Category
Foam Dressing
 
Send Inquiry
Description
Technical Parameters
6

Product Overview

 

Our bordered foam dressing is a sterile, single-use primary barrier dressing engineered with a hydrophobic polyurethane (PU) outer membrane and an integrated adhesive perimeter encasing an absorbent cellular foam pad. Specifically designed for wounds exposed to environmental contaminants or external fluids, the outer PU film features a calibrated pore size of ≤ 0.5μm that provides a mechanical barrier against bacterial penetration (pathogen diameter typically 0.5-5 μm). This bordered foam dressing repels liquid ingress and shields the wound bed while preserving physiological moisture vapor transmission.

 

 

Technical Specifications

 

Item Specification
Product Name Bordered Foam Dressing (Microbial Barrier Polyurethane Island Foam)
Dressing Type Hydrophobic Bacterial-Barrier Foam Dressing / Self-Adhering Island Matrix
Base Material / Active Ingredient Semi-permeable hydrophobic polyurethane membrane (pore size ≤ 0.5 μm), porous hydrophilic polyurethane foam core, hypoallergenic border adhesive, protective release paper
Sterility Sterile (Single-use disposable clinical device)
Available Sizes 5 cm x 5 cm, 10 cm x 10 cm, 10 cm x 10.8 cm, 15 cm x 15 cm (Custom configurations available upon request)
Material Structure PU film pore rating: ≤ 0.5 μm; Foam core density: 0.090–0.220 g/cm³; Liquid absorption: ≥ 10.0 g/g; Thickness tolerance: ±1.0 mm; Heavy metals: ≤ 10 ppm; Chemical pH: 5.0–9.0; Loss on drying: ≤ 6.0%
Packaging Unit-dose sterile barrier peel pouch; 5 to 10 pouches per dispenser box; multi-ply export shipper
Sterilization Method Terminal Irradiation Sterilization (validated to ISO 11137)
Shelf Life 5 Years (60 Months)
Storage Condition Store in a dry, ventilated area under normal room temperature; protect from direct UV radiation and excessive moisture
OEM / ODM Support Supported (Custom border dimensions, membrane MVTR adjustments, private labeling, customized clinical dispenser boxes)

 

 

Key Features

 

Unidirectional moisture vapor breathability – allows excess cellular vapor to evaporate outward while blocking inward liquid migration, which helps prevent peri-wound maceration.

Perimeter adhesive seal – encloses the absorbent core on all four sides, helping eliminate peripheral entry points for airborne particulates and clinical microbes.

Non-leaching physical barrier mechanism – provides antimicrobial defense purely through physical exclusion without chemical agents, helping reduce the risk of localized cytotoxic reactions.

Impermeable shower barrier – enables patients to carry out basic daily hygiene routines without risk of moisture entering the sterile wound interface.

Elastomeric shear resistance – flexible PU film backing moves naturally with anatomical joint flexion without micro-cracking or compromising the peripheral microbial seal.

Terminal irradiation validation – sterile single-use manufacturing achieves verified sterilization across all layers without altering the sub-micron pore architecture.

84

 

2

Application Guidance & Clinical Protocol

 

  1. Clean the wound bed and surrounding skin according to institutional protocols; verify that peri-wound skin is dry to ensure optimal adhesive attachment.
  2. If surrounding skin is at risk of maceration, apply a skin barrier wipe and allow it to dry completely prior to dressing positioning.
  3. Select a bordered foam dressing size where the absorbent pad extends beyond the wound margin, ensuring the adhesive perimeter adheres entirely to healthy, dry skin.
  4. Remove protective liners, position the foam pad centrally over the wound, and smooth the adhesive border outward without stretching the PU membrane.
  5. Replacement Cadence: Inspect the site daily; replace immediately if fluid reaches the border margin, if the peripheral seal loosens, or every 24 hours in high-drainage scenarios (wear time should not exceed clinical protocols).
  6. Removal Procedure: Gently lift one edge of the adhesive skirt and peel it away parallel to the skin surface. If adherence occurs, moisten with sterile saline to remove without disturbing the wound bed.

 

Contraindications & Incompatibility Cautions

 

Absolute contraindication on full-thickness third-degree burns.

Not indicated for wounds with active, uncontrolled arterial hemorrhage.

Oxidizing Chemical Warning: Do not apply alongside hydrogen peroxide or hypochlorite solutions, as strong oxidizing agents degrade the polyurethane polymer matrix and compromise film barrier integrity.

 

 

 

 

Sizes & Packaging Details

 

Size Dressing per Pouch Pouches per Box Boxes per Carton Intended Channel / Usage
5 cm x 5 cm (2" x 2") 1 pc 10 20 Laparoscopic Ports / Small Drain Sites
10 cm x 10 cm (4" x 4") 1 pc 10 20 Standard Post-Operative & Ulcer Care
10 cm x 10.8 cm (4" x 4.3") 1 pc 10 20 Specialized Surgical Incision Coverage
15 cm x 15 cm (6" x 6") 1 pc 5 20 Large Sacral & Extensive Trauma Zones

 

Commercial OEM & Packaging Capabilities

  • Primary Barrier Pouches: High-integrity medical peel pouches (medical coated paper/poly or Tyvek) validated to maintain sterility under terminal irradiation without seal failure.
  • Clinical Dispenser Cartons: Stiff cardboard boxes with GS1 DataMatrix barcodes, production lot control, and multi-language regulatory information.
  • Bespoke Manufacturing Options: Customization of PU film thickness, membrane MVTR levels, adhesive border widths, and private-label master shipping cases.

 

3

 

Foam Dressing

Quality & Regulatory Information

 

Quality Management Standards: Produced in ISO 13485:2016 audited cleanrooms dedicated to medical film lamination and sterile packaging.

European Regulatory Compliance (CE 0197): Evaluated and certified in conformity with EU Medical Device Regulation (MDR) standards for sterile wound barrier dressings.

US FDA Device Listing: Registered in compliance with FDA 21 CFR regulations for polyurethane wound dressings.

Preclinical Biocompatibility Verification: Screened in compliance with ISO 10993 biological evaluations for in vitro cytotoxicity, dermal irritation, and sensitization.

 

 

 

 

 

 

Hot Tags: Bordered Foam Dressing, China Bordered Foam Dressing suppliers, manufacturers, factory

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!