Cooling Gel for Burns

Product Name:cooling gel for burns

Product composition and structure

The main raw material of the product is 90% purified water. The others are medical grade emulsified silicone oil, emulsifier, propylene glycol, propylene glycol.

Method of use:

1)Dressing

For heat burn

a.Tear open Burncare Sachet and lay the dressing across the wound site.

b.Squeeze the remaining gel from the sachet across the dressing, allow to remain in contact

with the wound site for at least 30mins.

c.If necessary, secure Burncare in place with a conforming bandage, taking care not to apply

too much pressure.

d.Seek Medical attention if burn is severe or covers a large area.

e.Burncare gel is soluble and can be rinsed off by saline or sterile water if necessary.

For chemical burns

a.If it is liquid chemical it must be irrigated off site by cold water for approximately 15~20mins.

b.If it is powder chemical it must be brushed off site, then wash the wound site by cold water

for approximately 15~20mins.

c.Follow the instruction as per heat burn.

2)Gel:

For heat burn

1.Open Burncare package, apply gel across the wound site, form a generous layer to affected

area. Do not rub the wound site. Allow to remain in contact with the wound site at least for

30mins.

2.Seek Medical attention if burn is severe or covers a large area.

3.Burncare gel is soluble and can be rinsed off by saline or sterile water if necessary.

For chemical burns

1.If it is liquid chemical it must be irrigated off site by cold water for approximately 15~20mins.

2.If it is powder chemical it must be brushed off site, then wash the wound site by cold water

for approximately 15~20mins.

3.Follow the instruction as per heat burn.