Product Overview

The Adhesive Foam Wound Dressing is a sterile, single-use polyurethane dressing integrated with a medical-grade polyurethane (PU) film and an adhesive border. Engineered with a porous, absorbent polyurethane foam core, it provides high fluid uptake capacity alongside a breathable, waterproof exterior backing. This dressing is designed for moderate to highly exuding chronic and acute wounds, absorbing wound drainage, maintaining an optimal moist wound healing environment, and protecting the wound bed from external bacterial contamination without requiring secondary fixation tapes.

Technical Specifications

Item	Specification
Product Name	Adhesive Foam Wound Dressing
Dressing Type	Adhesive Polyurethane Foam Dressing
Base Material / Active Ingredient	Hydrophilic polyurethane foam pad, waterproof PU film backing, medical-grade adhesive
Sterility	Sterile (Single use only)
Available Sizes	10 cm × 10 cm, 15 cm × 15 cm (Custom sizes available upon request)
Material Structure	Foam density: 0.090 g/cm³–0.220 g/cm³; Thickness tolerance: ±1 mm; PU film pore size: ≤0.5 μm; Liquid absorption: ≥10.0 g/g; pH: 5.0–9.0
Packaging	Individually packed in sterile peel pouches, 5–10 pcs/box
Sterilization Method	Irradiation sterilization
Shelf Life	5 years
Storage Condition	Store in a ventilated, dry area at room temperature; avoid direct exposure to sunlight
OEM / ODM Support	Supported (Custom sizing, private labeling, packaging configuration)

Key Features

High fluid uptake capacity – porous polyurethane core absorbs wound fluid (≥10.0 g/g) to help protect periwound skin from breakdown and maceration.

Integrated adhesive border – helps keep the dressing in position without requiring additional fixation tape across most application sites.

Moisture balance maintenance – supports physiological hydration at the wound bed, providing conditions favorable for natural healing.

Waterproof outer film – serves as a functional barrier against moisture and outside contaminants while allowing gas and vapor exchange.

Conformable foam matrix – flexes comfortably over contoured anatomy and provides light mechanical cushioning.

Gentle wound release – non-stick contact interface helps reduce pulling on healing tissue and lessens patient discomfort during dressing changes.

Controlled material purity – low heavy metal content (≤10 ppm) and clean drying profiles help maintain skin tolerance.

Indications & Applications

Designed for moderate to heavily draining partial- and full-thickness wounds across acute and extended care settings:

Chronic Wounds: Pressure injuries/ulcers, diabetic foot ulcers, and venous or arterial leg ulcers.
Surgical & Acute Sites: Post-operative incisions, donor sites, and general surgical wounds.
Minor Traumas & Burns: Skin tears, abrasions, lacerations, and 1st to 2nd-degree thermal burns.
Secondary Coverage: Can be paired over primary alginate or ribbon fillers in deeper cavitary spaces.

Contraindications: Not intended for third-degree burns, heavily infected sites with uncontrolled drainage, or alongside oxidizing agents such as hydrogen peroxide or hypochlorite solutions.

Sizes & Packaging

Size

Dressing per Pouch

Pouches per Box

10 cm × 10 cm

(Pad: approx. 5 cm × 5 cm)

1 pc

15 cm × 15 cm

(Pad: approx. 10 cm × 10 cm)

1 pc

Custom Sizes / Die-Cut Shapes

1 pc

Configurable

Packaging & OEM Capabilities:

Individual medical-grade Tyvek/foil or paper-poly peel pouches ensure sterile barrier integrity.
Inner box and master carton quantities are fully configurable to meet hospital, retail pharmacy, and distributor channel specifications.
Comprehensive OEM/ODM private labeling services are available, including custom artwork, barcode formats, multilingual IFUs, and specialized border adhesive options (acrylic or silicone).

Quality & Regulatory Information

ISO 13485
CE Marking
FDA Medical Device Listing
Sterilization Validation: Compliant with radiation sterilization validation protocols
Biocompatibility Testing: Evaluated for cytotoxicity, skin irritation, and delayed-type sensitization