Product Overview
Emergency Burn Gel is a sterile, water-soluble topical hydrogel formulated for rapid first-aid cooling and physical barrier coverage of acute thermal burn injuries. Compounded with 90% purified water, medical-grade silicone oil emulsion, and humectants (glycerol and propylene glycol), the viscous formulation dissipates localized heat directly at the trauma site. Engineered for field rescue and occupational emergency kits, this Emergency Burn Gel provides immediate heat dissipation for first- and second-degree burns, scalds, and chemical flash injuries, soothing exposed skin and shielding the lesion from airborne contaminants prior to definitive hospital care.

Products Description
| Item | Specification |
|---|---|
| Product Name | Emergency Burn Gel / Relieve Burn Gel Dressing |
| Dressing Type | Sterile Water-Soluble Burn Hydrogel & Saturated Dressings |
| Base Material / Active Ingredient | 90% Purified Water, Medical-Grade Silicone Oil Emulsion, Water-Soluble Azone, Glycerol, Propylene Glycol |
| Sterility | Sterile (Single-use protocol) |
| Material Structure | Clear homogeneous hydrogel; Viscosity: 5,000–30,000 mPa·s (25±2℃); pH: 5.0–7.5; Water content: ~90% |
| Packaging | Individual foil sachets, sealed bottles with spray atomizers, or sterile foil-pouched dressing pads |
| Sterilization Method | Gamma Irradiation |
| Shelf Life | 5 Years |
| Storage Condition | Store in a clean, ventilated room between 0°C and 40°C with relative humidity ≤ 80%; keep away from corrosive gasses |
| OEM / ODM Support | Fully supported (Custom sachet fill volumes, branded spray bottles, first-aid kit contract packaging, private labeling, etc.) |

Key Features
Rapid conductive heat dissipation – high purified water content (90%) conducts heat away from the wound bed, helping limit thermal progression into underlying subcutaneous structures.
Thixotropic clinging viscosity – dynamic viscosity (5,000–30,000 mPa·s) keeps the gel stationary on facial, neck, and vertical body contours without running off during transit.
Clean water-soluble rinsing – dissolves completely in sterile saline or water, enabling painless, non-abrasive removal without leaving residue during clinical triage.
Protective airborne barrier – forms a cohesive physical layer across raw skin that helps isolate exposed nerve endings and protect the wound bed against airborne debris.
Ambient storage stability – maintains cooling efficiency without requiring cold storage or refrigeration, ensuring readiness in high-temperature transport vehicles and outdoor first aid stations.
Moisture-retentive conditioning – enriched with glycerol and propylene glycol to help prevent the burn bed from desiccation and tissue crusting during transport.
Non-toxic, biocompatible formulation – controlled physiological pH (5.0–7.5) and gamma irradiation sterilization offer a dependable safety profile for compromised skin.
Indications & Applications
Emergency Burn Gel is engineered for immediate first-line management of minor to moderate thermal trauma across pre-hospital and occupational settings:
Thermal Burns & Scalds: Immediate coverage for scalds from boiling liquids, hot surface contact burns, flash fires, and hot steam exposure (First- and Second-Degree burns).
Post-Irrigation Chemical Burns: Soothing secondary coverage applied following extensive 15–20 minute mandatory cold water decontamination of chemical splashes.
Radiation & Environmental Burns: First-aid relief for extensive solar erythema (sunburns) and mild welder's flash.
First Responder & Industrial Deployment: Standard component for municipal EMS trauma kits, commercial kitchen burn stations, wildfire backpack kits, and industrial manufacturing safety stations.
Clinical Boundaries & Safety Warnings:
Not indicated for full-thickness third-degree burns with charred tissue or exposed bone.
Recommended initial contact time is at least 30 minutes; single application duration should not exceed 2 hours, and cumulative contact time should not exceed 12 hours.
If chemical burns occur, thoroughly flush the wound with cold water for 15–20 minutes before applying gel.


Sizes & Packaging
| Product Format | Unit Specification | Dispenser Box Qty | Target Emergency Channel |
|---|---|---|---|
| Foil Sachet | 3.5 g Unit Dose | 6 / 10 / 25 pcs | Pocket first aid kits, consumer vehicle kits, compact trauma pouches |
| Squeeze Tube | 25 g / 50 g Tube | 1 pc | Commercial kitchens, laboratory safety stations, workshop kits |
| Spray Atomizer | 50 ml / 120 ml Spray | 6 pcs | Rapid non-contact coverage for extensive sunburns and large surface abrasions |
| Saturated Pad | 5 cm × 5 cm Dressing | 20 pcs | Finger, hand, and localized scald trauma |
| Saturated Pad | 10 cm × 10 cm Dressing | 20 pcs | Standard limb burns, forearm flash burns, industrial scalds |
| Saturated Pad | 20 cm × 20 cm Dressing | 6 pcs | Torso, thigh, or facial burn coverage |
| Large Sheet | 40 cm × 60 cm Sheet | 4 pcs | Fire rescue, EMT paramedic units, full-limb wrapping |
| Trauma Blanket | 120 cm × 160 cm Blanket | 1 pc | Firefighter rescue vehicles, disaster preparedness caches, military field triage |
OEM & Private Label Capabilities:
Custom Filling & Packaging: Contract filling for customized sachet capacities (0.9 g–20 g), continuous spray cans, or plastic pump bottles.
First Aid Kit Integration: Bulk supply in sealed pouches designed for DIN 13157 / ANSI Z308.1 standard first aid kits.
Global Regulatory Labeling: Multilingual packaging layouts, UDI barcoding, and regional distributor artwork adaptation.
Quality & Regulatory Information
ISO 13485:2016 Certified – Medical Device Quality Management System
CE Marking (CE 0197) – Certified under European Medical Device Directives
US FDA Device Listing & Establishment Registration
Sterility Assurance: Validated Gamma Irradiation sterilization cycle achieving a Sterility Assurance Level (SAL) suitable for clinical open wounds
Biocompatibility & Safety Profile: Formulated to meet safety parameters for external mucosal/dermal contact; free from sensitizing parabens and heavy metals

Hot Tags: Mergency Burn Gel, China Mergency Burn Gel suppliers, manufacturers, factory
